# We name the Rasnik stations A, B, C, D, E, F from left
# to right. Plug station A into driver socket 1 and station
# F into driver socket 2. If you are using a VME-based
# driver, make sure it's base address is 00E00000.

default:
instrument: Rasnik
config:
	image_source daq
	analysis_enable 1
	daq_ip_addr 10.0.0.37
	daq_source_ip_addr *
	intensify none
	daq_adjust_flash 1
	daq_device_type 2
	daq_source_device_type 2
	zoom 1
end.

acquire:
name: Rasnik_ABC
instrument: Rasnik
result: None
time: 0
config:
	daq_flash_seconds 0.001
	daq_driver_socket 00E00000:1
	daq_device_element 1
	daq_source_device_element 2
	daq_source_driver_socket 00E00000:1
end.


acquire:
name: Rasnik_ACD
instrument: Rasnik
result: None
time: 0
config:
	daq_flash_seconds 0.001
	daq_driver_socket 00E00000:1
	daq_device_element 2
	daq_source_device_element 1
	daq_source_driver_socket 00E00000:2
end.


acquire:
name: Rasnik_FDC
instrument: Rasnik
result: None
time: 0
config:
	daq_flash_seconds 0.001
	daq_driver_socket 00E00000:2
	daq_device_element 2
	daq_source_device_element 1
	daq_source_driver_socket 00E00000:1
end.

acquire:
name: Rasnik_FED
instrument: Rasnik
result: None
time: 0
config:
	daq_flash_seconds 0.001
	daq_driver_socket 00E00000:2
	daq_device_element 1
	daq_source_device_element 2
	daq_source_driver_socket 00E00000:2
end.